1. Make sure the surface you're going to treat is dry and clean.
2. Using a soft cloth, brush or sponge, apply the Wax Polish sparingly in small areas, following the direction of the grain pattern where possible.
3. For a uniform colour, wipe evenly, blending the Wax Polish over the entire surface area by applying a small amount of pressure when treating by hand.
4. Ensure you remove any excess Wax Polish with a separate, absorbent cloth; again, following the wood grain where possible.
5. Leave the furniture to completely dry for approximately 3 minutes and buff to finish with a clean, soft cloth.

If you require an even higher level of sheen, reapply the Wax Polish by repeating the above steps.

Each tin contains 400ml of wax polish.